Filter
Top Products
1. INSTALLATION
2
•
Rubber foot which absorb vibration (supplied) maybe attached as below if vibration is a
problem.
45 5mm
Aline with edge
of hanger.
Rubber foot
TM-166 No.18 black
Mounting procedure
Follow the procedure below to mount the display unit on a tabletop or the overhead.
Tabletop, overhead mounting
1. Fix the hanger by four tapping screws 5 X 16.
2. Screw knob bolts in display unit, set it to hanger, and tighten knob bolts.
3. Attach hard cover to protect LCD.
WARNING
Tabletop, overhead mounting of display unit