Filter
Top Products
3. OPERATION
3-11
12. Use the Omnipad to choose the baud rate of the equipment connected and
then press the [ENT] key.
13. INTERVAL is selected; press the [ENT] key.
25ms
100ms
200ms
1S
2S
Tx interval options
14. Use the Omnipad to choose appropriate output interval and then press the
[ENT] key.
15. Choose IEC VERSION and then press the [ENT] key.
IEC ED1
IEC ED2
NMEA 1.5
IEC, NMEA version options
16. Choose appropriate IEC (or NMEA) edition and then press the [ENT] key.
17. Choose HDG TALKER and then press the [ENT] key.
GP
HE
HN
HC
Heading talker options
18. Choose appropriate heading talker and then press the [ENT] key. If an
external gyrocompass is used, choose HC.
GP: GPS navigator
HE: North-seeking gyrocompass
HN: Non-north seeking gyrocompass
HC: Gyrocompass
19. Press the [DISP] key to close the menu, or press the [MENU] key several
times to return to the I/O SETUP menu to setup another output port.