Garmin 330 Marine RADAR User Manual


 
GTX 330 Installation Manual Page 2-1
190-00207-02 Revision G
2 INSTALLATION OVERVIEW
2.1 Introduction
This section provides hardware equipment information for installing the GTX 330 Mode S Transponder,
related hardware and optional accessories. Installation of the GTX 330 should follow the data detailed in
this manual. Cabling is fabricated by the installing agency to fit each particular aircraft. The installation
should follow the guidance of FAA AC 43.13-1B and AC 43.13-2A where applicable.
2.2 Installation Materials
The GTX 330 is available under the following part numbers:
2.2.1 Configurations Available
Model
Catalog
Part
Number
Unit Part
Number
Diversity Front
Panel
Color
Install
Kit/Docs*
TSO Class
GTX 330 010-00230-00 011-00455-00 No Black No 2A1 121 010
GTX 330 010-00230-01 011-00455-00 No Black Yes 2A1 121 010
GTX 330 010-00230-20 011-00455-20 No Gray No 2A1 121 010
GTX 330 010-00230-21 011-00455-20 No Gray Yes 2A1 121 010
GTX 330D 010-00293-00 011-00455-10 Yes Black No 2A1 121 011
GTX 330D 010-00293-01 011-00455-10 Yes Black Yes 2A1 121 011
GTX 330D 010-00293-20 011-00455-30 Yes Gray No 2A1 121 011
GTX 330D 010-00293-21 011-00455-30 Yes Gray Yes 2A1 121 011
* Note: Documentation includes pilot’s guide and warranty registration card.
2.2.2 Equipment Available
Item Garmin P/N
Sub Assy, Connector Kit, GTX 330 011-00583-00
SMP, Install Rack, GTX 330 115-00294-00
Sub Assy, Backplate, GTX 330 011-00582-00
(For use with GTX 330)
Sub Assy, Backplate, GTX 330D 011-00582-01
(For use with GTX 330D)
Garmin GTX 330 Antenna kit*
(two required for diversity)
010-10160-00
* Note: A transponder antenna approved to TSO C66( ) or C74( ) that has been installed to meet the
requirements of this manual may be approved for use with the GTX 330.