Filter
Top Products
GTX 330 Installation Manual Page 5-13
190-00207-02 Revision G
5.2.9 RS-232 Input and Output Page
RS-232 INPUT (Altitude Source, GPS Data)
This is the electrical source for the GTX 330 altitude and GPS data input. Refer to Section 4.4.4 for
altimeter data selection priority.
SELECTION DESCRIPTION
OFF
DEFAULT. The altitude code input is not from an RS-232 source.
GPS
RS-232 ground speed from a GPS device.
ICARUS ALT
RS-232 serial altitude from an Icarus Instruments 3000.
ICRS ALT 25
f
t
Reports Icarus Instruments 3000 altitude in 25-foot increments
ADC NO ALT
RS-232 serial air data information from Shadin ADC 200, 200+, 2000.
ADC W/ALT
RS-232 serial air data information from Shadin ADC 200, 200+, 2000 plus
altitude data.
SHADIN ALT
RS-232 serial altitude from Shadin 8800T, 9000T, 9200T.
SHDN ALT 25
f
t
Reports Shadin 8800T, 9000T, 9200T altitude in 25-foot increments
FADC NO ALT
RS-232 serial air data from Shadin 9628XX-X family of Air Data
Computers and Fuel/Air Data Computers.
FADC W/ALT
RS-232 serial air data from Shadin 9628XX-X family of Air Data
Computers and Fuel/Air Data Computers plus altitude data.
REMOTE
RS-232 serial input remote data. Reserved for future use.
RS-232 OUTPUT (Altitude Source)
SELECTION DESCRIPTION
OFF
DEFAULT for channel 2. No unit is connected to output of this channel.
ICARUS ALT
DEFAULT for channel 1. RS-232 serial altitude from an Icarus
Instruments 3000.
REMOTE
RS-232 serial output remote data. Reserved for future use.
REMOTE + TIS
RS-232 serial output remote data with TIS.
5.2.10 Operation Configuration Pages
VS RATE (Vertical Speed Rate)
This field is the typical vertical speed for climb/descent of the aircraft. The settable number determines
the rate of climb the GTX 330 assumes as liftoff for starting the flight timer and operational functions.
The range is 100 feet per minute to 9999 feet per minute, and is set to 500 fpm at the factory.
RS-232 INPUT-OUTPUT Page
First CONFIGURATION Page