Garmin 6000 Series Marine GPS System User Manual


 
12 GPSMAP 6000/7000 Series Installation Instructions
Wiring Additional NMEA 0183 Devices
The NMEA 0183 data cable included with the GPSMAP 6000/7000 series chartplotter supports the NMEA 0183 standard, which is used to wire
various NMEA 0183-compliant devices, such as VHF radios, NMEA instruments, autopilots, or a computer.
Basic NMEA 0183 Wiring
These diagrams illustrate basic NMEA 0183 wiring used to connect your GPSMAP 6000/7000 series chartplotter to NMEA 0183-compliant
devices such as an AIS or DSC device. For more-complete information on the NMEA 0183 capabilities of the GPSMAP 6000/7000 series
chartplotter, see the “Advanced NMEA 0183 Wiring” section (page 13).
Wiring to a NMEA 0183-compliant Device (AIS)
+
-
>
>
>
>
>
>
>
>
PINK RECEIVE B(-)
Garmin
GPSMAP 6000/7000 series
chartplotter
NMEA 0183-compliant
device
(AIS)
BATTERY
10–35 Vdc
WIRE COLOR WIRE
RED (POWER)
BLACK (PWR GND)
RED (POWER)
FUSE
7.5 A - 42 V
BLACK (DATA GND)
WHITE
ORANGE/WHITE
GRAY
TRANSMIT A(+)
TRANSMIT B(-)
RECEIVE A(+)
BLACK (PWR GND)
BLACK (DATA GND)
POWER
CABLE
NMEA 0183
C
ABLE
Wiring to a Single-ended NMEA 0183-compliant Device
+
-
>
>
>
>
>
>
Garmin
GPSMAP 6000/7000 series
chartplotter
NMEA 0183-compliant
device
BATTERY
10–35 Vdc
WIRE COLOR WIRE
RED (POWER)
BLACK (PWR GND)
RED (POWER)
FUSE
7.5 A - 42 V
BLACK (DATA GND)
WHITE
ORANGE/WHITE
GRAY
PIN
K
BLACK (PWR GND)
BLACK (DATA GND)
POWER
CABLE
NMEA 0183
C
ABLE
TRANSMIT
RECEIVE
UNCONNECTED
Notes:
If the NMEA 0183-compliant device has only one receiving wire (no A, B, +, or -), leave the pink wire unconnected.
If the NMEA 0183-compliant device has only one transmitting wire (no A, B, +, or -), connect the orange/white wire to ground.
Consult the installation instructions of your NMEA 0183-compliant device to identify the Transmit A(+) and B(-) wires and Receive A(+)
and B(-) wires.
Use 28 AWG, shielded, twisted-pair wiring for extended runs of wire.
Solder all connections and seal them with heat-shrink tubing.