Filter
Top Products
GHC 10 Quick Start Manual 9
Using GPS Steering
The autopilot can steer the boat along a
route dened by your GPS device, or in
preset patterns based on a GPS location
(waypoint). To use GPS steering, you
must have an optional GPS device
connected to the autopilot. For more
information on connecting an optional
GPS device, see the GHP 10/10V
Installation Instructions.
The GPS steering patterns are based on a
GPS waypoint to which you are actively
navigating using your optional GPS
unit. This waypoint is called the active
waypoint. For example, when you begin
a Search GPS pattern, the autopilot rst
drives your boat to the active waypoint
and then circles the active waypoint in a
spiral pattern.
To cancel a GPS steering pattern, you
can physically steer the boat, use the soft
keys to manually adjust the heading, or
press the STBY button.
To begin a GPS pattern:
1. Begin navigating to a waypoint on
your GPS device.
2. From the Heading screen, select
Menu > GPS Steering and choose a
GPS pattern.
3. Select Engage to begin the GPS
pattern with the default settings.
OR
Select Setup to adjust the settings for
the GPS pattern (if available).
4. Choose the direction of the pattern if
prompted.
NOTE: If the pattern has only one
setting, the setting name appears
instead of Setup. If no settings are
available for the pattern, Setup will
not be available.
CAUTION: You are responsible for
the safe operation of your boat. Do not
begin a GPS route or a GPS pattern
until you are certain that the water is
clear of obstacles.