Filter
Top Products
GHC 10 Quick Start Manual 5
Understanding the Heading
Screen with the Autopilot
Engaged
When you engage the autopilot, the
autopilot takes control of the helm and
steers the boat to maintain your heading.
The top of the Heading screen displays
“Autopilot Engaged” in green, and your
heading is shown in the center. You can
use the soft keys to adjust the autopilot
heading manually or to adjust the
settings from the menu.
You can steer the boat manually from the
helm while the autopilot is engaged. The
autopilot does not steer the boat while
you have the helm, and the message
“You Have the Helm” ashes at the top
of the screen in yellow. If you manually
maintain a specic heading for a few
seconds, the autopilot resumes control
of the new heading, and the message
“Autopilot Engaged” is displayed at the
top of the screen.
Soft-key
functions
Autopilot
status
Heading
Heading Screen with
Autopilot Engaged
Notes:
When the autopilot is steering a
pattern (page 7), the shape and
range of the pattern is shown
on the right side of the Heading
screen.
Some soft keys may appear
differently if you have step turning
enabled. For more information on
step turning, see page 11.
To place the autopilot in standby
mode:
Press the STBY (standby) button on
the GHC 10.
•
•