Filter
Top Products
4 GHC 10 Quick Start Manual
Using the GHC 10
Use the GHC 10 to engage and manually
steer the autopilot. In addition to steering
the autopilot, use the GHC 10 to begin
automatic steering functions and to
customize the autopilot.
Basic Operation
The Heading screen displays the status
of the autopilot and the heading. Use
the soft keys to engage the autopilot and
manually adjust the heading from the
Heading screen.
Understanding the Heading
Screen with the Autopilot in
Standby Mode
When you power the autopilot on, the
system starts in standby mode, with
the Heading screen displayed on the
GHC 10. When in standby mode, the
autopilot does not steer the boat—you
are responsible for the helm. When in
standby mode, the top of the Heading
screen displays “You Have The Helm”
in yellow, and your heading is shown in
the center.
When in standby mode, you can engage
the autopilot, adjust the settings from
the menu, or specify the transmission
direction of your boat (forward or
reverse) by using the soft keys.
Soft-key
functions
Autopilot
status
Heading
Heading Screen with
Autopilot in Standby
Mode
To engage the autopilot:
Press the soft key labeled Engage.