Filter
Top Products
Installation
313293C 5
Install Alternator
1. Use screws (14) to install alternator (1) inside junc-
tion box (JB).
2. Install screw (14) through other end of grounding
wire (17), washer (19), and mounting hole beneath
the grounding label inside junction box (JB).
3. Connect terminal ring on GND wire (17) to GND
screw (GS) on alternator (1). Tighten with nut (18).
Install Regulator Assembly
1. Position regulator (6) for proper air flow direction.
2. Connect pressure gauge (12), elbow (7), safety
valve (9), elbow fitting (10) and nipple fitting (5) to air
regulator (6). Use pipe sealant on all non-swiveling
and threads without gaskets.
3. Remove plug (K) from solenoid bank (L) and install
swivel (13).
4. Connect regulator assembly to swivel (13) and
tighten.
F
IG. 3: Install Alternator
F
IG. 4: Connect Grounding Wire
14
1
JB
r_256991_313293_12a
18
19
17
14
GS
JB
r_256991_313293_6a
FIG. 5: Install Regulator Assembly
12
10
9
7
13
6
5
K
L
a
i
r
f
l
o
w
r_256991_313293_1