Filter
Top Products
Setup
6 313293C
Setup
Connect Hose
1. Connect tubing (15) between the air regulator outlet
fitting (10) and the alternator air inlet (M).
2. Feed tubing (21) up through cord grip (P) and con-
nect to alternator exhaust fitting (N).
3. Tie down exhaust tubing (15) to XM sprayer frame
with tie straps (22) where it exhausts downward with
no restrictions.
Connect Cables
Use reference labels located near CAN connectors to
properly connect components that are connected with
the alternator. Each CAN cable is marked with the part
number. The ends with the blue-colored sockets attach
to the alternator. See F
IG. 1 on page 3 for Alternator
Conversion Kit Cable Connections.
1. Connect 15V782 CAN cable (3) to CAN con-
nectors on USB module (B) and alternator (A).
2. Connect 15V778 CAN cable (J) to CAN
connectors on alternator (A) and fluid control mod-
ule (D).
3. Connect 15V783 CAN cable (4) to CAN con-
nectors on alternator (A) and display module (C).
Set Air Regulator
Use the air regulator (6) to set the air pressure to 18 +/-
1 psi (124 kPa, 1.24 bar).
F
IG. 6: Hose Connections
NOTICE
Ensure that the tubing (15) is clear of any moving
parts.
10
M
N
P
15
r_256991_313293_8