Filter
Top Products
ENGLISH
33
If you want to listen to a particular SW station, you need to know the precise
frequency and wavelength. Many short wave stations will send you broad-
casting schedules which give you the information you need. You can also
download the information from the Internet.
One station which is always up-to-date is Deutsche Welle in Bonn. You can
contact it at the following address:
Deutsche Welle Tel.: ++49 (0)228-429-3208
Technische Beratung Fax: ++49(0)228-429-3220
Kurt-Schumacher-Straße 3 E-mail: tb@dw-world.de
D-53117 Bonn www.dw-world.de
Connecting the external SW antenna
To improve short wave reception, you can connect the external SW antenna
supplied.
1 Insert the plug of the antenna cable into the »SW EXT. ANT.« socket
on the left of the device.
Note:
Unroll and align the antenna to achieve the best reception. If there is
interference, you can move the »DX./LO.« switch to »LO.«.
SSB reception (for example for radio hams and
shipping)
Some short wave stations broadcast Morse code for shipping using conti-
nuous waves (CW). Voice signals, for example amateur radio, is normally
broadcast on the single side band (SSB).
1 Select the SW waveband using »BAND«.
2 Select the frequency band, for example »75 m«, using »SW SELECT«.
3 Set the »SSB ON OFF« switch (on the right of the device) to »ON«.
– The »TUNE/SSB
•
« LED lights up red and then goes out.
4 Slowly turn the »SSB FINE TUNING« dial on the right of the device
until you achieve a clear reception.
– If an SSB station is received, the »TUNE/SSB
•
« LED lights up
orange.
Notes:
For fine tuning, you can also press in the »TUNING FINE« dial.
The range for SSB fine tuning is around ± 1.5 kHz.
OPERATION
_______________________________________________