Filter
Top Products
36
Setting various function modes
Using the »MODE« button and a two-digit code, which you enter using the
numerical keys »0 ... 9«, you can change various functions:
This is how to change the various function modes:
1 Press »MODE«.
– Display: »( )« flashes.
2 Enter the code, for example »40«, using »0 ... 9«.
– Display: »( 40 )« flashes.
3 Press » FREQ./CLOCK« to confirm.
– Display: briefly »OFF«, then the time or frequency.
– The signal tone is deactivated.
Switching on the back lighting for the display
1 Press »LIGHT« to switch on the display lighting for 7 seconds.
2 Press »LIGHT« to switch off the display lighting.
Disabling and enabling the buttons
1 To disable the buttons, move »LOCK« to the »
•
« position.
– Display: » «.
2 To enable the buttons, move »LOCK« to the opposite position.
– Display: » « disappears from the display.
OPERATION
_______________________________________________
Function
FM frequency change
in 100 kHz steps
MW frequency change
in 9 kHz steps
Time display in 12
hour format
Signal tone off
Arrange stations in
sequence from low to
high frequency range
Function
FM frequency change
in 200 kHz steps
MW frequency chan-
ge in 10 kHz steps
Time display in 24
hour format
Signal tone on
Arrange stations in
sequence from low to
high frequency range
Code
11
21
31
41
51
Code
10
20
30
40
50
MODE ˯
MODE ˯
MODE ˯
MODE ˯
MODE ˯