Filter
Top Products
Page 5
SKU 92103/104/105 For technical questions, please call 1-800-444-3353
2. Always wear ANSI approved safety impact eye goggles and heavy work gloves
when setting up and using the Motor. Using personal safety devices reduce the risk
for injury. Safety impact eye goggles and heavy work gloves are available from Harbor
Freight Tools.
3. Maintain a safe working environment. Keep the work area well lit. Make sure there
is adequate surrounding workspace. Always keep the work area free of obstructions,
grease, oil, trash, and other debris. Do not use install the motor in areas near
flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet
location.
4. Avoid unintentional starting. Make sure you are prepared to begin work before
turning on the Motor.
5. Do not force the Motor. This tool will do the work better and safer at the speed and
capacity for which it was designed.
6. Always unplug the Motor from its electrical outlet (or turn off the circuit breaker
and tag) before performing any inspection, maintenance, or cleaning
procedures.
7. When installing motor, observe all national and local codes. Make sure to install,
protect, and fuse according to the latest issue of the National Electric Code, NEMA
Standard Publication No. MG2, and local codes. Ground frames in accordance with
NEC Article 430. For general grounding information, refer to NEC Article 250.
8. Install guards when appropriate. Make sure all moving parts, including the shaft
and any attached accessories, are permanently guarded to prevent clothing and body
parts from being caught.
9. Disconnect power before working on motor driven equipment.
10. Before each use, check all nuts, bolts, and screws for tightness. Vibration during
operation may cause these to loosen.
11. Keep extension cord off the ground and away from water.
12. Always connect the Line Cord to a Ground Fault Circuit Interrupter (GFCI) protected
electrical outlet.
13. Do not allow children to play with, or touch this product.
14. Keep the motor dry; never submerge in water. Keep the motor a safe distance from all
flammable objects.
WARNING! People with pacemakers should consult their physician(s) before using
this product. Operation of electrical equipment in close proximity to a heart pacemaker
could cause interference or failure of the pacemaker.
(1)