Filter
Top Products
Page 295805 -95806
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Model 95805 95806
Construction Die cast aluminum
Overall Dimensions 8-1/2” L X 4-5/8” H X 1-5/8” W
10-13/16” L X 5-1/5” H
X 1-15/16” W
Markings 30°, 45°, 90°
Handle Input 3/4” NPT 3/4” NPT
Weight 1 lb. 1.85 lb.
Conduit Capacity 1/2” 3/4”
Conduit Types EMT, RMC, or IMC
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below
may result in serious injury.
SAVE THESE INSTRUCTIONS
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Stay alert. Watch what you are doing, use common sense. Do not use while
tired or under the influence of drugs, alcohol, or medication. A moment of
inattention may result in serious personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control in unexpected situations.
Use safety equipment. Always wear eye protection. Nonskid safety shoes must
be used for appropriate conditions. Always wear ANSI-approved safety goggles
when using or performing maintenance on this tool.
Use clamps (not included) or other practical ways to secure and support the
workpiece to a stable platform. Holding the work by hand or against your body
is unstable and may lead to loss of control.
1.
2.
3.
4.
5.