Filter
Top Products
2 - 4
Gilbarco
®
Terminal Default Settings
Scan the following Plug and Play code to program the scan engine for a Gilbarco terminal. This bar code sets the baud rate
to 2400 bps and the data format to 7 data bits, even parity, 2 stop bits. It also adds a carriage return (CR) suffix and pro-
grams the following prefixes for each symbology:
Honeywell Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scan engine for a Honeywell bioptic scanner auxiliary port configura-
tion. This bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
Datalogic™ Magellan
®
Aux Port Configuration
Scan the following Plug and Play code to program the scan engine for a Datalogic Magellan auxiliary port configuration.
This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scan engine for an NCR bioptic scanner auxiliary port configuration.
The following prefixes are programmed for each symbology:
Symbology Prefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
Symbology Prefix Symbology Prefix
UPC-A A Code 39 B1
UPC-E E0 Interleaved 2 of 5 B2
EAN-8 FF All other bar
codes
B3
EAN-13 F
Gilbarco Settings
Honeywell Bioptic Settings
Datalogic Magellan Settings
NCR Bioptic Settings