Filter
Top Products
7. Secureallcablesto thebase, usingthe includedzipties,at themount
points shown in the illustration (see the illustration Tying Down the
Cables).
8. Turn the base right side up and pull up gently on the battery tie-down
strapsto removethe slack.
NOTE: You will need to perform more assembly procedures, as well as charge the
battery for 8 hours, before you install the battery into the portable case. See
Charging and Installing the Battery formoreinformation.
Tying Downthe Cables
Transducer
JumperCable
ZipTie
Mounting
Point
PowerCable
7