Filter
Top Products
5. Assembling the Portable Case
Inthisprocedure,you will installthe baseassembly intothe portable case.
1. Unzip the largest opening on the front of the portable case.
2. Insert the base assembly into the portable case, so that the
PiranhaMAX™control headis facing outof thecase. For bestresults,
pull the case over one shoulder of the handle at a time.
3. Adjust the case so that you can easily grab the handle, through the
fabric handhold inset, from the outside top of the portable case.
InstallingtheBaseintotheCase PullingtheCaseovertheHandle Holding thePortable Case
8