Filter
Top Products
System Status
Use SystemStatus to viewsystem connectionsand
to conduct a unit self-test.
The following screens are displayed in turn
when you press the VIEW button when using
System Status:
• Self Test
• Accessory Test.
Self Test displays results from the internal diagnostic self test, including unit serial
number, Printed Circuit Board (PCB) serial number, software revision, total hours of
operation and the input voltage.
Accessory Test lists the accessories connected to
the system.
NOTE: The speed accessory will be detected only if the
paddlewheelhas movedsinceyour 300Series™Fishing
System was powered up.
Exit System Status by powering your Fishing System off.
System StatusAccessoryTest Screen
System StatusSelfTest Screen
23