Humminbird 4089701 Marine GPS System User Manual


 
61
Sonar Menu Tab
Digital Depth Source
(Advanced, Down Imaging™ models with optional-
purchase transducers only [561 DI, 570 DI, & 571 HD DI])
Settings: Auto, 2D Element; Default = Auto
Digital Depth Source specifies the beam that will be used to provide the depth
for the digital depth readouts (see Views and Setup Menu Tab: Select Readouts
for more information). It is important to set this menu option based on the
transducer that is connected to the control head, as follows:
If a Down Imaging™ transducer is connected to the control head,
select Auto. Depending on the depth, Auto will automatically choose
the 2D conical beam or the Down Imaging™ beam to display depth in
the digital readout window. Auto is the default setting.
If an accessory transducer is connected to the control head, select 2D
Element. For example, if you connect an ice transducer to your Down
Imaging™ unit, change the digital depth source to 2D Element in order
to display depth in the digital readout window. The 2D Element setting
should not be used with a Down Imaging™ transducer.
NOTE: Contact our Customer Resource Center to determine which accessory
transducers are compatible with your Humminbird® Fishing System, or visit our Web
site at humminbird.com.
Imaging Palette
(Down Imaging™ Views only [561 DI, 570 DI, and
571 HD DI])
Settings: Dark, Light, Inverse; Default = Dark
Imaging Palette allows you to select which monochrome palette you would like
to use for the Down Imaging™ display.