Filter
Top Products
3. Customizing and Assembling the HDR 650
Your HDR 650 includes a variety of face plates and trim rings so that you can
customize the appearance.
1. Select one face plate and one trim ring.
2. Peel off the protective backing from the face plate. Be careful not to let the
adhesive touch anything prematurely.
CAUTION: In order to provide a lasting, waterproof bond, the face plate adhesive
is extremely sticky, and you will NOT be able to re-position it once you have stuck
it onto the face of the HDR 650.
3. Carefully line up the face plate with the face of the HDR 650. Press the face
plate into place so that all keys are accessible and the display is visible (see
illustration).
4. Align the inside tabs of the trim ring with the HDR 650 tabs, and snap the
trim ring onto the front of the HDR 650 (see illustration).
HDR 650
Face Plate
Trim Ring
Tabs
5
Installation