Filter
Top Products
POWER/RANGE DIAL
Use the Power/Range dial to power-on the ICE Flasher Series™
control head and to also set the depth range.
1. To Power-On the Control Head: Turn the Power/Range dial
from Off to any of the Depth Range settings.
2. To Set the Depth Range: Turn the Power/Range dial to A,
x1, x2, x4, or x10. (A, x1, x2, x4, x10)
Auto Range: Selecting A (Auto) will tell the unit to automatically choose the best range
based on the actual depth of the bottom. A (Auto) setting is not available on the ICE 35.
Manual Ranges: Selecting a manual range allows you to choose a specific range. For
example, if you only want to read sonar returns up to 80 feet or 40 meters in depth, set
the manual range to x4.
NOTE: The maximum range setting should not exceed the actual depth to the bottom.
Manual Ranges
x1 0 - 20 ft 10m
x2 0 - 40 ft 20m
x4 0 - 80 ft 40m
x10 0 - 200 ft 100m
Auto Ranges available (ICE 45 and 55 only)
0 - 20 ft 10m
0 - 40 ft 20m
0 - 60 ft 30m
0 - 80 ft 40m
0 - 100 ft 60m
0 - 120 ft 80m
0 - 200 ft 100m
21