Filter
Top Products
COLOR (ICE 55 Only)
ICE 35 Flasher and ICE 45 Flasher use Color Palette 1 to display sonar
returns on the Flasher Dial. The Color Key, available in the ICE 55 Flasher
only, allows you to choose between three color palettes so that you can view sonar
return signals in higher detail. (Color Palette 1, 2, or 3; Default = Palette 1)
1. Press the Color key to choose Color Palette 1, 2, or 3.
2. ICE 55 will save the setting and display the palette immediately. Also, the palette
number will be shown on the Active Display.
See Palette 1, Palette 2, or Palette 3 for more information.
Palette 1 (ICE 35/45/55)
Red Strong Signal
Dense, large objects such as fish, thick
vegetation, or hard bottom, are usually displayed
as thick or thin red lines on the Flasher Dial. In
Palette 1, Red indicates a strong sonar return
signal.
Yellow Medium Signal
Small objects such as fish, sparse vegetation, or
soft bottom (sand or mud) are usually displayed
as yellow lines on the Flasher Dial. In Palette 1,
Yellow indicates a medium sonar return signal.
Green Weak Signal
Light objects such as your jig, bait fish, sparse
vegetation, and sometimes microscopic activity
or turbulence are displayed as green lines on the
Flasher Dial. In Palette 1, Green indicates a weak
sonar return signal.
Palette Number
NOTE: The location of an object in
relation to the transducer can
influence how it appears on the
Flasher Dial. For example, a large
object might display as a weak
sonar return signal if it is located
on the outer edges of the
transducer beam, where as a
small object located at the top of
the transducer beam mightdisplay
as a strong sonar return signal.
27