Filter
Top Products
■ ATA operation
Select the target which you want to track on the dis-
play.
q Push [Ù Ú Ω ≈] to move the “+” cursor on the de-
sired target.
w Push [TARGET]/[ ] for 1 sec. to select the tar-
get for tracking.
•Dotted square symbol appears on the cursor.
•Target identification number, bearing, distance readout,
course (CSE), speed (SPD), CPA and TCPA appear in
the information screen.
• Timer starts to count the progressing time.
• The vector appears on the target, after the progressing
time of 20 sec. has passed.
• It changes to the circle display of a solid line and a vec-
tor display, and tracking operation is decided, after the
progressing time of one min. has passed.
• When the target which is following disappears, a mark
changes to a lozenge and is blinked. A mark disappears
after one min..
• When a target advances within a setting value, a mark
changes to a triangle, blinks and sounds alarm sound.
Alarm sound will be cancelled if one of key is pushed.
• To cancel the target setting, move the cursor on the tar-
get, then push [TARGET]/[ ] for 1 sec.
• [TARGET]/[ ] is pushed for changing the display of
EBL/VRM etc. to target information.
• In order to choose target which displays information,
cursor is united with target and [TARGET]/[] is
pushed.
■ Plotting marks There are 5 kinds of plotting marks.
: Selected, uncalculated mark.
: Selected, calculated mark.
: Normal, calculated mark.
: CPA/TCPA alarm mark. The target is
close to within a minimum range and
time. Alarm emit indicator. Push [TAR-
GET]/[ ] to cancel the alarm.
: When the tracking of a target disap-
pears.
■ Course and speed vector
The vector indicates the target’s predicted, true or rel-
ative course and speed.
•Vector time may change depending on the TRAIL TIME set-
ting. (see VIDEO menu, p. 6)
•The tip of the vector shows the target’s predicted position
after a certain time, which has been selected in the “TRAIL
TIME”.
Vector
Current position
Vector time
Target’s predicted
positon
NEW
BRG
CSE
CPA
DIST
SPD
TCPA
No.10
BRG 305.7T
0:20
CSE 081.3T
CPA 5.9NM
DIST 11.43NM
SPD 12.3KT
TCPA 0:50
Identification No.
Bearing
Course
Distance
Speed
Passage of time
Closest Point of
Approach
Time to Closest Point of
Approach
ATA (Automatic Tracking Aid)
19
7
MR-1000R2_T2.qxd 04.2.24 10:22 Page 19