Icom EX-2714 Fish Finder User Manual


 
5
2
PANEL DESCRIPTION
#5 COMPASS INDICATOR (pgs. 24, 39)
GYRO : NMEA (gyro) is connected.
COMPASS : NMEA (compass), N+1 or AUX data is
connected.
#6 EBL1/ 2 READOUTS (pgs. 1516)
Shows the bearing of the displayed Electronic Bear-
ing Lines (EBL1 and EBL2) when the EBL is in use.
EBL2 shows PI (!0) readout.
#7WAYPOINT/MOB READOUTS (p. 13)
Shows the bearing and distance to the waypoint
received from navigation equipment.
This readout appears when the WPT of the FUNC-
TION menu is turned ON.
To display the waypoint/MOB marker, bearing data
and NMEA data with 0183 format is necessary.
(p. 39)
Shows the bearing and distance to the MOB
(Man Over Board) event marker.
Push [MOB]/[ ] to cancel the readout and the
symbol.
#8 POSITION/CURSOR READOUT (p. 13)
Shows your own ship or cursor latitude and longi-
tude readout when external NMEA data with 0183
format is connected.
Select SHIP or CURS in the POSN DISP of the
FUNCTION menu.
To display the POSITION; NMEA 0183 is necessary.
To display the CURSOR; NMEA 0183 and bearing data
are necessary.
#9 CURSOR INDICATOR
Shows the bearing and distance to the cursor.
$0 VECTOR INDICATOR (p. 18)
Shows the ATA and OWN vector type.
T: True vector
R: Relative vector
$1 VECTOR TIME INDICATOR (p. 18)
Shows the vector interval time. Select vector time
in the TRAIL TIME of the VIDEO menu.
30 min. is applied, when is selected for the vector
time.
$2 TRAILS INDICATOR (p. 12)
Shows the trail time.
Echo remains with gradation during the trail time period
on the screen. (Except for the trail time; )
Progressing time counter starts to count the time until
the timer reaches the trail time.
$3 HEADING INDICATOR
Shows the heading bearing readout.
The HDG readout indicates the bow of the ships bearing
in a clockwise direction from north.
$4 IR INDICATOR (p. 11)
Eliminates or reduces interference caused by other
radar operating nearby.
This function is available when the IR in the VIDEO
menu is set to 1 or 2.
$5 ECHO STRETCH INDICATOR (p. 6)
Appears when the echo stretch function is in use.
This function is available when the STRETCH of the
VIDEO menu is turned ON.
$6 CROSS LINE CURSOR
Used for measuring the bearing and distance, set-
ting the alarm zone, selecting the ATA targets, etc.
Push [Ù Ú Ω ≈] several times to move the cursor.
$7 EBL2 (pgs. 1516)
Used for bearing measurement. When a target is
selected, the EBL readout (#6) shows the bearing.
$8 OWN SHIP VECTOR INDICATOR
Shows the vector of your own ship.
$9 VRM 1 (pgs. 1516)
%0 VRM 2 (pgs. 1516)
Used for distance measurement. When a target is
selected, the VRM1/2 readout (%3) shows the dis-
tance.
%1 NORTH MARK
The north mark shows the true north direction.
%2 EBL1 (pgs. 1516)
Used for bearing measurement. When a target is
selected, the EBL readout (#6) shows the bearing.
%3 VRM1/2 READOUTS (pgs. 1516)
Shows the distance of the displayed Variable Range
Markers (VRM1 and VRM2) when the VRM is in
use.
Nautical miles (NM) and kilometers (KM) can be se-
lected in the FUNCTION menu as the distance unit.
%4 ALARM INDICATOR (p. 17)
Appears when the alarm function is in use.
%5 ZOOM INDICATOR (p. 11)
Appears when the zoom function is in use.
Push [TARGET]/[ ] and [TRAILS]/[ ] simul-
taneously to turn the function ON or OFF.
%6 TIME INDICATOR
%7 TIME INDICATOR
Shows the estimated time to the marker edge from
center of the marker with current speed.
%8 TIME INDICATOR
Shows the estimated time to the waypoint with cur-
rent speed.
MR-1000R2_T2.qxd 04.2.24 10:22 Page 5