Filter
Top Products
SECTION 1 SPECIFICATIONS
1 - 1
All stated specifications are subject to change without notice or obligation.
Number of channels
Type of emission
Frequency stability
Frequency resolution
Power supply requirements
(negative ground)
Current drain
Operating temperature range
Number of CTCSS frequency
Dimensions
(proj. not included)
Weight (included 3 cells)
Output power
Modulation system
Max. freqequency deviation
Spurious emissions
Adjacent channel power
External mic.connector
Receiving system
Intermediate frequency
Sensitivity (12 dB SINAD)
Adjacent channel selectivity
Spurious response
Intermoduration
Audio output power
External SP connector
[ITA], [ITA-1] [CSA], [CSA-1]
RECEIVER TRANSMITTER GENERAL
69 channel (simplex; 433.075–434.775)
16K0F3E
±2500 Hz (±5.7 ppm)
25 kHz
3
× AA(R6) dry, alkaline;or optional BP-202
less than 140 mA less than 500 mA
–10˚C to +55˚C (–14˚F to +122˚F)
38 (67.0–250.3 Hz)
55.5(W)
× 102.5(H) × 26.5(D) mm
2
3
⁄16(W) × 4
1
⁄32(H) × 1
1
⁄32(D) inch
180 g; 7.8 oz
10 mW 500 mW
Variable reactance frequency modulation
±5.0 kHz
0.25 µW
–40 dB
50 µW
more than 47 dB
3-conductor 2.5(d) mm/2.2 kΩ
Double conversion superheterodyne
1st: 21.7 MHz
2nd: 450 kHz
0.2 µV ;–14 dBµ
more than 40 dB
more than 40 dB
more than 40 dB
100 mW at 10% distortion with an 8 Ω load
2-conductor 3.5 (d) mm (
1
⁄8")/8 Ω