Filter
Top Products
10
4
SCAN OPERATION
■ Scan resume
condition
The scan resume condition can be selected as a pause or
timer scan.
q Push [LOW] for 2 sec.to enter
set mode.
w Push [LOW] several times
until “SC” appears.
e Push [Y] or [Z] to select the
scan resume timer.
- “t-05” :Scan pauses 5 sec.
while receiving a signal.
- “t-10” :Scan pauses 10 sec.
while receiving a signal.
- “t-15” :Scan pauses 15 sec.
while receiving a signal.
- “P-05” :Scan pauses until the
signal disappears and
then resumes 5 sec.
thereafter.
r Push [LOW] for 2 sec. to exit
set mode.
[
Pauses until the signal
disappears.
10 sec. timer for resume
condition.
15 sec. timer for resume
condition.
5 sec. timer for resume
condition.