Filter
Top Products
3
2
PANEL DESCRIPTION
y SCAN TYPE SELECTION SWITCH [O/G]
➥Push to select the scan types in order. (p. 8)
•Open scan—“OS” appears.
•Group scan—“GS” appears.
•Priority scan—“PS” appears.
➥When the group or priority scan is selected, this switch
sets the displayed channel as the priority channel for the
selected scan when pushed for 2 sec. (p. 9)
•While the priority channel is set, the priority channel is dis-
played at the right of the operating channel.
u OUTPUT POWER SWITCH [LOW]
➥Push this switch to toggle between high and low output
power. (p. 5)
➥Enters set mode when pushed for 2 sec.
➥Scrolls the set mode contents while in the set mode.
i DUPLEX SWITCH [DUP]
➥Toggles the selected channel between duplex or simplex
operation on channels 1 to 8. (p. 7)
➥Toggles the lock function ON and OFF when pushed for
2 sec. (p. 6)
•“ ”appears when the lock function is activated.
o FUNCTION DISPLAY (p. 4)
!0 TRANSMIT INDICATOR (p. 5)
Lights red while transmitting.
!1 EXTERNAL DC POWER JACK [CHARGE]
Connect a 12 to 16 V DC power source using the optional
cables, CP-12L or OPC-254L, to charge the attached bat-
tery pack; or connect the BC-110V wall charger for charg-
ing.
CAUTION:This connection is for charging ONLY.
Power to the transceiver must be turned OFF during
charging.
!2 SPEAKER/MICROPHONE
!3 EXTERNAL SPEAKER AND MICROPHONE JACKS
[SP/MIC]
Connect an optional speaker-microphone or headset, if de-
sired. The internal microphone and speaker will not func-
tion when either is connected. (See p. 19 for a list of
available options.)
!4 ANTENNA CONNECTOR (p. 1)
Connects the supplied antenna.