18
9
SPECIFICATIONS
DGeneral
•Frequency coverage : 450.000–480.000 MHz
(Incl. all 40 UHF C.R.S. ch.)
• Mode : FM (16K0F3E)
•Tuning step increment :25 kHz
•Acceptable power supply : 9.6 V DC nominal
(negative ground) (authorized battery packs)
•Usable temp.range : –10˚C to +60˚C
•Frequency stability : ±5 ppm
•Current drain (approx.) :
Tx at 5 W 1.6 A
at 1 W 0.7 A
Rx standby 60 mA
max. audio 250 mA
power saved 13 mA
•Antenna impedance : 50 Ω (nominal)
•Dimensions :57(W)✕140(H)✕37(D) mm
(projections not incl.)
•Weight (with BP-195) : 370 g
DTransmitter
•Output power : Max. 5 W (at 9.6 V DC)
•Modulation :Variable reactance frequency
modulation
•Max.frequency deviation : ±5 kHz
•Spurious emissions : 70 dB typical
•Adjacent channel power : 70 dB typical
•External mic. connector : 3-conductor 2.5 (d) mm/2 kΩ
DReceiver
•Receive system : Double conversion
superheterodyne
•Intermediate frequencies : 1st 46.35 MHz
2nd 450 kHz
•Sensitivity : 0.25 µV at 12 dB SINAD
•Squelch sensitivity : 0.25 µV typical (at threshold)
•Adjacent ch.selectivity : 70 dB typical
•Spurious response : 70 dB typical
•Intermodulation rejection : 65 dB typical
•Audio output power : 500 mW typical at 10%
(at 9.6 V DC) distortion with an 8 Ω load
•External SP connector : 2-conductor 3.5 (d) mm/8 Ω
All stated specifications are subject to change without
notice or obligation.