Filter
Top Products
13
4
MEMORY OPERATION
■ Programming a memory
channel
The transceiver has 200 (20 CH. × 10 BANK) memory chan-
nels for storage of often-used frequencies.
q Push [CLR•
DEL] to select the frequency mode, if neces-
sary.
w Select the desired frequency.
• Push
,
then push [ENT•WX] to select a weather channel.*
• Set the desired frequency or weather channel* using [DIAL] or
keypad.
e Push
,
then push [MR•MW] to program the contents
into the selected memory channel.
•Memory BANK and memory channel number appears.
r Rotate [DIAL] to select the desired memory channel num-
ber.
•Push , then push [0•BANK] to select the BANK number if de-
sired.
• Push [CLR•DEL], [ENT•WX] or , then push [0•BANK] to exit
the BANK selection mode.
•“M,” BANK and memory numbers are blinks.
t Push [ENT•WX] to program the information into the chan-
nel and return to the frequency mode.
*Weather channel: U.S.A. version only.
(or rotate [DIAL])
(or rotate [DIAL])
Push
Push
Push
Push
Push
or
or
Push
Push
Push
or
•EXAMPLE: Programming WX-05* into memory BANK 3/
memory channel 9.