Filter
Top Products
19
6
VOR NAVIGATION (IC-A24 ONLY)
■ VOR functions
DTo select the CDI mode
To show the deviation between your flying course and the de-
sired course, push , then push [4•
CDI] to select the CDI
mode.
DTo select the DVOR mode
When entering the NAV band, 108.000–117.975 MHz, the
IC-A24 selects the DVOR mode automatically.
To show your aircraft’s direction to (or from) the VOR station,
push , then push [1•
DVOR] to select the DVOR mode.
D‘TO’ or ‘FROM’flag selection
The to-from flag indicators indicate whether the VOR naviga-
tion information is based on a course leading to the VOR sta-
tion or leading away from the VOR station.
Push , then push [3•
FROM] or [2•TO
] to change the flag
from ‘TO’ to ‘FROM’ or vice versa, respectively.
NOTE:
•When using the ‘TO’flag and passing through the VOR station,
the ‘TO’flag changes to the ‘FROM’flag automatically.
•When turning power ON, the ‘FROM’flag is selected automati-
cally.
DSelecting the next VOR station when using
CDI mode
(when using the course deviation needle)
q Push , then push [1•
DVOR] to select the DVOR mode.
w Push the keypad or rotate [DIAL] to set the next VOR sta-
tion’s frequency.
e Push , then push [4•
CDI] to select the CDI mode.
•Select ‘TO’ or ‘FROM’flag, if desired.
Operating frequency can not be
changed.
Each course deviation arrow
indicates a two-degree deviation.
Course indicator is fixed, but it
can be changed with the tuning
dial or keypad.
Operating frequency can not be
changed.
Course deviation needle does not
appear.
Course indicator shows your
direction to (or from) the VOR
station.