Filter
Top Products
17
6
DSC OPERATION
New2001
6
■ Transmitting DSC calls
To ensure correct operation of the DSC function, please
make sure you set the squelch correctly. (P. 7)
D Transmitting an Individual call
The Individual call function allows you to transmit a DSC sig-
nal to a specific ship only.
q Push [DSC•
POS] to enter the DSC menu.
w Push [Y] or [Z] to select “ ,” push [DSC•
POS].
e Push [Y] or [Z] to select the desired pre-programmed In-
dividual address, push [DSC•POS].
• The ID code must be set in advance. (p. 13)
r Push [Y] or [Z] to select the desired intership channel,
push [DSC•
POS].
• Intership channels are already preset into the transceiver in pre-
ferred order.
• After pushing [DSC•POS], Channel 70 is selected and “”
appears at the channel comment indicator.
t Push [DSC•POS] to transmit the Individual call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
• Routine category only is available.
Transmitting
Push
Scrolls
!IC-M422.qxd 05.2.23 2:20 PM Page 17 (1,1)