Filter
Top Products
D Transmitting a Group call
The Group call function allows you to transmit a DSC signal
to a specific group only.
q Push [DSC•
POS] to enter the DSC menu.
w Push [Y] or [Z] to select “ ,” push [DSC•
POS].
e Push [Y] or [Z] to select the desired pre-programmed
Group address, push [DSC•POS
].
• The ID code must be set in advance. (p. 13)
r Push [Y] or [Z] to select the desired intership channel,
and push [DSC•
POS].
• Intership channels are already preset into the transceiver in pre-
ferred order.
• After pushing [DSC•POS], Channel 70 is selected and “”
appears at the channel comment indicator.
t Push [DSC•POS] to transmit the Group call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
• Routine category only is available.
y After the Group call has been transmitted, the specified
channel (in step r) is selected automatically.
u Push and hold [PTT] to communicate your message to the
responding ship.
Scrolls
Transmitting
Push
20
6 DSC OPERATION
New2001
!IC-M422.qxd 05.2.23 2:20 PM Page 20 (1,1)