Filter
Top Products
22
6
DSC OPERATION
■ DSC individual ID
A total of 40 DSC address ID’s can be programmed and
named with up to 10 characters.
Programming address ID
q Push [DSC/ENT] to select the DSC menu.
w Rotate the channel selector to select “Set-up” and push
[DSC/ENT].
e Rotate the channel selector to select ‘Add ID,’ then push
[DSC/ENT].
r Set the distress ID and ID name, then push [DSC/ENT].
•Rotate the channel selector to select the character.
•Push [CH/WX] to advance the cursor.
•Push [SCAN] to move the cursor backward.
•Push [HI/LO] to cancel and exit the condition.
t Push [DSC/ENT] to program and to exit the condition.
Deleting address ID
q Push [DSC/ENT] to select the DSC menu.
w Rotate the channel selector to select “Set-up” and push
[DSC/ENT].
e Rotate the channel selector to select ‘Delete ID,’ then push
[DSC/ENT].
•When no address ID is programmed, the transceiver exits the
condition automatically.
Set-up
˘DeleteID
AddID
Offsettime
Selitem
RCVcalls
DTRSset
˘Set-up
AddID
ID:
NAME:
Set-up
DeleteID
˘AddID
Offsettime
Selitem
RCVcalls
DTRSset
˘Set-up