Icom IC-M502 Marine Radio User Manual


 
Supplied accessories
The following accessories are supplied: Qty.
q Mounting bracket ............................................................ 1
w Microphone hanger (OPC-562) ...................................... 1
e Mic hanger screws (3 × 16) ............................................ 2
r Mounting screws (5 × 20) ............................................... 2
t Flat washers (M5) ........................................................... 2
y Spring washers (M5) ...................................................... 2
u Mounting bracket knobs ................................................. 2
i DC power cable (OPC-946) ........................................... 1
Antenna
A key element in the performance of any communication sys-
tem is an antenna. Ask your dealer about antennas and the
best places to mount them.
Fuse replacement
One fuse is installed in the supplied DC power cable. If a fuse
blows or the transceiver stops functioning, track down the
source of the problem, if possible, and replace the damaged
fuse with a new, rated one.
Cleaning
If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
AVOID the use of solvents such as benzene or al-
cohol, as they may damage transceiver surfaces.
Fuse rating: 10 A
qw
e
r
t
y
ui
34
9
CONNECTIONS AND MAINTENANCE