Filter
Top Products
15
6
DSC OPERATION
New2001
■ DSC individual ID
A total of 30 DSC address IDs (9-digit) can be programmed
and named with up to 5 characters.
D Programming Address ID/Group ID
q Push [DSC•IC] to enter the DSC menu.
w Push [Y] or [Z] to select “ ,” and push [DSC•
IC].
e Push [Y] or [Z] to select “ ,” and push [DSC•
IC].
r Push [Y] or [Z] to input 9-digit of the appropriate Individ-
ual/Group ID.
• Push [SCAN•TAG] or [CH/WX•DUAL] to move the cursor forward
or backward, respectively.
• Push [16•9] to cancel and exit the condition.
1st digit ‘0’ is fixed for a group ID. Thus an address ID input
cannot start with ‘0.’ When you input 1st digit ‘0’ and other 8
digits, the ID is automatically registered as a group ID.
t After inputting 9-digit ID, push [DSC•IC] to input 5 charac-
ters ID name using [Y] or [Z].
• Push [SCAN•TAG] or [CH/WX•DUAL] to move the cursor forward
or backward, respectively.
• Push [16•9
] to cancel and exit the condition.
y Push [DSC•IC] to program and exit the DSC menu.
Scrolls
6
!IC-M402A_SA.qxd 03.11.11 2:51 PM Page 15 (1,1)