Filter
Top Products
23
6
DSC OPERATION
New2001
D Transmitting Position Request call
Transmit a Position Request call when you want to know a
specified ship’s current position, etc.
q Push [DSC•
IC] to enter the DSC menu.
w Push [Y] or [Z] to select “ ,” then push
[DSC•
IC].
e Push [Y] or [Z] to select the desired pre-programmed in-
dividual address.
• The ID code for position request must be set in advance. (p. 15)
r Push [DSC•IC] to enter the standby condition for Position
Request call.
• Channel 70 is selected and “” appears.
t Push [DSC•IC] to transmit the Position Request call.
y After the Position Request call has been transmitted, the
following indication is displayed.
•“ ” scrolls at the channel comment indicator.
u Push any key to exit the condition and return to the nor-
mal operation.
Scrolls
Scrolls
6
!IC-M402A_SA.qxd 03.11.11 2:52 PM Page 23 (1,1)