Ingersoll-Rand 637401 Marine Sanitation System User Manual


 
MATERIAL CODE
[A] = Aluminum
[B] = Nitrile
[C] = Carbon Steel
[CI] = Cast Iron
[Co] = Copper
[E] = E.P.R.
[H] = Hytrel
[Ha] = Hastelloy-C
[K] = PVDF (KynarR)
[MSP]=MedicalGradeSantoprene
[P] = Polypropylene
[SH] = Hard Stainless Steel
[SP] = Santoprene
[SS] = Stainless Steel
[T] = PTFE
[V] = Viton
PE10X-X-X-A0SPage 4 of 8
PARTS LIST / PE10X-X-X-A0S FLUID SECTION
L 637401-XX FLUIDSECTION SERVICE KITS INCLUDE: BALLS(see Ball Option, refer to -XX in Service Kit chartbelow), DIAPHRAGMS (see Diaphragm
Option, refer to -XX
in Service Kit chart below), and items 19, 70, 144, 175 and 180 (listed below) plus 94276 Lubriplate FML-2 grease (page 6).
SEAT OPTIONS PE10X-XXX-XXX-A0S BALL OPTIONS PE10X-XXX-XXX-A0S
“21”
L “22” (1-1/4” dia.)
-XXX Seat Qty [Mtl] -XXX Seat Qty [Mtl] -XXX Ball Qty [Mtl] -XXX Ball Qty [Mtl]
-AXX 96152-A (4) [SP] -GXX 96152-G (4) [B] -XAX 93278-A (4) [SP] -XSX 92408 (4) [SS]
-CXX 96152-C (4) [H] -HXX 94706 (4) [SH] -XCX 93278-C (4) [H] -XTX 93278-4 (4) [T]
-EXX 96158 (4) [C] -LXX 95836 (4) [Ha] -XGX 93278-2 (4) [B] -XVX 93278-3 (4) [V]
-FXX 96156 (4) [A] -SXX 96151 (4) [SS]
DIAPHRAGM OPTIONS PE10X-XXX-XXX-A0S
L Service Kit L “7” L “8” L “19” (1/8” x 2-1/8” o.d.) L “33” (1/8” x 1-5/8” o.d.)
-XXX
-XX = (Ball)
-XX
= (Diaphragm) Diaphragm Qty [Mtl] Diaphragm Qty [Mtl] Gasket Qty [Mtl] Gasket Qty [Mtl]
-XXA 637401-XA 96267-A (2) [SP] ----- --- --- 93280 (4) [E] 93279 (4) [E]
-XXC 637401-XC 96267-C (2) [H] ----- --- --- Y327-225 (4) [V] Y327-220 (4) [V]
-XXG 637401-XG 96267-G (2) [B] ----- --- --- Y325-225 (4) [B] Y325-220 (4) [B]
-XXM 637401- XM 96267-M (2) [MSP] ----- --- --- 93282 (4) [T] 93281 (4) [T]
-XXT 637401-XT 96146-T (2) [T] 96145-A (2) [SP] 93282 (4) [T] 93281 (4) [T]
-XXV 637401-XV 95989-3 (2) [V] ----- --- --- Y327-225 (4) [V] Y327-220 (4) [V]
NOTE: Gasket items 19 and 33 are not required with seat options -AXX, -CXX and -GXX.
CENTER SECTION OPTIONS PE10X-XXX-XXX-A0S
PE10A-X-X-A0S PE10R-X-X-A0S PE10S-X-X-A0S
Item Description (size) Qty Part No. [Mtl] Part No. [Mtl] Part No. [Mtl]
28 W asher (8.5 mm i.d.) (4) ----- --- 96217 [SS] ----- ---
43 Ground Lug (see p age 7) (1) 93004 [Co] ----- --- 93004 [Co]
68 Air Cap (1) 95994-4 [A] 96104-3 [P] 96007-3 [SS]
69 Air Cap (1) 95994-3 [A] 96104-4 [P] 96007-4 [SS]
74 Pipe Plug (1/4 - 18 N.P.T. x 7/16”) (2) Y17-51-S [SS] 93832-3 [K] Y17-51-S [SS]
131 Screw (M8x1.25-6gx95mm) (4) 96001 [C] ----- --- 96001 [C]
(M8 x 1.25 -6g x 100 mm) (4) ----- --- 96216 [SS] ----- ---
n 180 Washer (4) 96006 [Co] ----- --- 96006 [Co]
L n “O” Ring (2.5 mm x 12 mm o.d.) (8) ----- --- 96292 [B] ----- ---
195 Nut (M8x1.25-6h) (4) 96005 [SS] 95879 [SS] 96005 [SS]
MANIFOLD / FLUID CAP MATERIAL OPTIONS PE10X-XXX-XXX-A0S
PE10X-XAX- PE10X-XCX- PE10X-XHX- PE10X-XSX-
Item Description (size) Qty Part No. [Mtl] Part No. [Mtl] Part No. [Mtl] Part No. [Mtl]
5 Backup Washer (2) 95990-3 [C] 95990-3 [C] 95990-1 [SS] 95990-1 [SS]
6 Diaphragm Washer (2) 95990-3 [C] 95990-3 [C] 95990-2 [Ha] 95990-1 [SS]
9 Washer (0.505” i.d.) (2) 93189- 1 [SS] 93189-1 [SS] 96161 [Ha] 93189-1 [SS]
14 Screw (M12x1.75-6gx25mm) (2) 95997 [SS] 95997 [SS] 96159 [Ha] 95997 [SS]
15 Fluid Cap (2) 95935 [A] 95831 [CI] 96148 [Ha] 96010 [SS]
60 Inlet Manifold (1) 95936-[z] [A] 95829-[z] [CI] 96150-[z] [Ha] 96008- [z] [SS]
61 Outlet Manifold (1) 95960-[z] [A] 95830-[z] [CI] 96149-[z] [Ha] 96009- [z] [SS]
63 Pipe Plug (1 N.P.T.) (PE10X-AXX-XXX-A0S) (2) Y17-125 [A] Y17-55-S [SS] ----- --- Y17-55-S [SS]
(R 1) (PE10X-BXX-XXX-A0S) (2) 96160-2 [A] 96160-1 [SS] ----- --- 96160-1 [SS]
z For N.P.T.F. thread models (PE10X-AXX-XXX-A0S), use “-1” z For BSP thread models (PE10X-BXX-XXX-A0S), use “-2”
EXTERNAL HARDWARE OPTIONS PE10X-XXX-XXX-A0S COMMON PARTS
PE10X-XXP- PE10X-XXS- Item Description (size) Qty Part No. Mtl
Item Description (size) Qty Part No. Mtl Part No. Mtl 1 Rod (1) 95995 [C]
26 Screw (M8x1.25-6gx30mm) (8) 95880-1 [C] 95880 [SS] L n 70 Gasket (2) 95843 [B]
27 Bolt (M8x1.25-6gx40mm) (20) 95896- 1 [C] 95896 [SS] Ln 144 “U” Cup (3/16” x 1-1/8” o.d.) (2) Y186-49 [B]
29 Hex Flange Nut (M8x1.25-6h) (20) 95879-1 [C] 95879 [SS] Ln 175 “O” Ring (3/32” x 13/16” o.d.) (2) Y325-114 [B]
n Air Section Service Kit Parts, see page 6.