Filter
Top Products
Page 5 of 8PE10X-X-X-A0S
PARTS LIST / PE10X-X-X-A0S FLUID SECTION
COLOR CODE
15
FOR THE
AIR MOTOR SECTION
SEE PAGES 6 & 7
Santoprene 8
PTFE 7
131 ,
x
175 k
Figure 2
View of two piece PTFE diaphragm
29 ,
144 k
70 k
. TORQUE REQUIREMENTS ,
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
(14) screw, tighten to 25 - 30 ft lbs (33.9 - 40.7 Nm).
(26) screws, 20 - 25 ft lbs (27.1 - 33.9 Nm).
(29) nuts, 15 - 20 ft lbs (20.3 - 27.1 Nm).
(131) screws, 12 - 17 ft lbs (16.3 - 23.0 Nm).
LUBRICATION / SEALANTS
k ApplyLubriplate FML-2 greaseto all“O” rings,“U”Cups &mating parts.
x Apply Loctite
R
242 to threads at assembly.
- Apply PTFE tape to threads at assembly.
~ Apply Loctite 271 to threads at assembly.
U Apply anti-seize compound to threads and bolt and nut flange heads
which contact pump case when using stainless steel fasteners.
DIAPHRAGM BALL
MATERIAL COLOR COLOR
Hytrel Cream Cream
Nitrile Black Red (S)
Santoprene Tan Tan
Santoprene Green N / A
(Backup)
PTFE White White
Viton Yellow (-) Yellow (S)
(-) Dash (S)Dot
8
1
2
7
Torque Sequence
22
21
19 s
26 , U
61
22
19 s
21
144 k
70 k 69
1 k 5
7
6
10
6
4
9
5
3
9195
14 , ~
180 k27 U
68
60
63 - k
27 U
74 -
k 180
28
AUXILIARY VIEW A-A
(models PE10R-XXX-XXX-A0S)
A
A
AUXILIARY VIEW B-B
(models PE10R-XXX-XXX-A0S)
180 k
195
33 s
33 s
29 ,
26 , U
63 - k
175 k
B
B
s Not used with PE10X-XXX-AXX-A0S, -CXX and -GXX.
Z Lubriplate FML-2 is a white food grade petroleum grease.