20
symbols on-screen. In this case
smaller sonar returns will be
depicted as fish symbols. This is
useful for identifying many smaller
sonar returns (such as baitfish) as
fish symbols.
Decreasing the value to a number
less than zero shows fewer fish
symbols on-screen. In this case
smaller sonar returns are
disregarded. This is useful for
eliminating many small sonar returns
when seeking larger species of fish.
The 105SX remembers this selection
even when the unit is powered off.
Triplog. Triplog provides a running
log of information based on input
from the Speed/Temp sensor.
Since Triplog requires
information from the Temp or
Speed/Temp sensors to operate,
if an accessory sensor is not
detected by the 105SX, the
Triplog menu will not appear as
a control menu.
Triplog provides seven pieces of
information: the current digital
depth, water surface temperature,
current boat speed, the distance
traveled since the 105SX was
powered up or reset, the average
speed, the total time elapsed since
power-up or reset, and the input
USING THE 105SX
MENU FUNCTIONS
Raw Sonar ID
+
On