Filter
Top Products
Fish Alarm. The Fish Alarm alerts you to
the presence of fish, or other targets not
connected to the bottom. The Fish Alarm
has three different settings that
correspond to the three different size fish
symbols shown on-screen.
The default setting is “OFF.” With the
“Large fish only” setting, the 350TX alarms
on only those targets that are represented
by the large fish symbols. The 350TX can be
set to alarm on only large and medium fish,
or set to alarm on all fish.
Once the Fish Alarm is enabled, the
350TX emits an audible beep when the
selected size fish symbol appears on-
screen.
Triplog. Triplog provides a running log of
information based on input from the
Temp/Speed sensor.
Since Triplog requires information
from the Temp/Speed sensor to
operate, if this sensor is not detected
by the 350TX, the Triplog menu will
not appear as an option.
Triplog provides seven pieces of information: the current digital depth, water
surface temperature, current boat speed, the distance traveled
since the 350TX
was powered up or reset
, the average speed, the total time elapsed since
power-up or reset, and the input voltage from your boat’s electrical system.
18
USING THE 350TX
MENU FUNCTIONS
Set for large fish only
Set for large and medium fish
Set for all fish