Filter
Top Products
23
Often a transducer switch is used to connect two tri-beams transducers, or a tri-
beam and a wide side to the 350TX. In AUTO the 350TX identifies the
transducer as the switch is changed. Only if the transducer is faulty do you need
to manually identify the transducer in the menu.
The 350TX can work with an older dual beam transducers (model DHS-W only);
however the fishfinder will not show left/right fish location. If this transducer is
being used, leave the menu set to TRI-BEAM. The transducer selection setting
is remembered when the unit is powered off.
When using a dual beam and tri-beam transducer together with a switch, leave
the menu set to TRI-BEAM. When using a dual beam and Wide Side transducer
together with a switch, manually select the correct
transducer in the menu each time the switch is
changed.
Diagnostic. Two options are available: HIDE and
SHOW. The factory setting is HIDE. Selecting SHOW
brings up the Diagnostic screen. See the
Using the
Diagnostic Feature
section for more information.
Units. The Units function allows the user to select
the units of measurement for the depth and speed
readout. Metres/KTS, (metres/nautical miles per
hour), Metres/KPH (metres/kilometres per hour),
FEET/MPH (feet/statute miles per hour) and FEET/KTS
(feet/nautical miles per hour), are available.The
350TX remembers this selection even when the unit
is powered off.
Languages. There are two language sets
available within the Languages option menu: Set
A – English, French, Italian, German, Norwegian,
Swedish, Spanish, and Finnish. Set B includes:
English, Hungarian, Danish, Polish, Portuguese
and Dutch.
To select your language, push the UP
or DOWN ARROW BUTTONS to scroll through
the list. The Languae setting is remembered when the unit is powered off and
the embedded Language Set
350TX A or 350TX B is displayed during startup.
USING THE 350TX
MENU FUNCTIONS