Filter
Top Products
SE7500CW2 Troubleshooting Guide - 13 - 08/21/02
reliability: http://support.intel.com/support/motherboards/server/SE7500CW2
Jumpers and BIOS Setup Options
1) How should the jumpers be set on Intel Server Board SE7500CW2?
For normal operation, the jumpers are set correctly from the factory. Refer to the
Technical Product Specification for more information on configuration jumper settings.
Input/Output
1) Does the Intel® Server Board SE7500CW2 support Ultra ATA/33/66/100 hard
drives?
Yes. One of the features of the Intel Server Board SE7500CW2 is its ability to support all
Ultra ATA transfer rates (i.e., 33MB/sec, 66MB/sec, and 100 MB/sec). To take advantage
of the increased bandwidth available on the IDE channels, a hard drive that implements
higher spindle speeds and a large onboard buffer size may be required.
2) What IDE cable should I use to support both Ultra ATA/100 and previous IDE
transfer protocols.
A 40-pin, 80-conductor cable can be used with Server Board SE7500CW2 and is fully
backward compatible with all IDE transfer protocols. It will also support Ultra ATA/100 if
used with one or two Ultra ATA/100 drives attached.