Filter
Top Products
16
|
KMR-700U
Audio Adjustments Other Functions
Dual zone control
Connecting USB or iPod to the unit when the
dual zone function is set to on, the front and rear
channels are switched to the USB/iPod source.
1 Enter Dual zone control mode
Press the [2ZONE] button.
2 Switch Dual Zone ON/OFF
Turn the [VOL] knob.
To switch the dual zone function to ON, select
“2ZONE: ON”.
3 Select the channel to set the source
Press [d] button, and then press [ ] or [ ]
button.
Select the channel with [ ] or [ ] button.
4 Select the source
Turn the [VOL] knob.
5 Exit Dual zone control mode
Press the [2ZONE] button.
⁄
• Adjust the volume of Front channel by [VOL] knob.
• Adjust the volume of Rear channel by <Audio Control>
(page 14).
• The Audio Controls have no effect on the rear source.
• When iPod or USB source is selected for the front channel,
only the same selection is available for the rear channel.
For example, when iPod is selected for the front channel,
only iPod can be selected for the rear channel, and not the
USB.
• When the dual zone function is set to ON, you can
control the front channel by using the remote control
KCA-RC107MR (optional accessory).
You can also allow the rear channel to be controlled by
remote control.
Backup memory delete
Initializes the settings of “MENU”, etc.
1 Enter Menu mode
Press the [
] button for at least 1 second.
“MENU” is displayed.
2 Select Backup memory delete item
Select the “Backup MEM DEL” display.
For how to select Menu items, refer to <Menu
System> (page 8).
3 Enter Backup memory delete mode
Press the [ENTER] button for at least 1 second.
“Backup MEM DEL?” is displayed.
4 Delete the Backup memory
Turn the [VOL] knob to select “YES”, and then
press the [ENTER] button.
”Reboot” is displayed and the unit reboots.