Filter
Top Products
8
|
KMR-700U
*Factory setting
** Refer to <Menu Glossary> (page 22).
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set during USB source.
: Can be set only during playback of the iPod source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set during Satellite radio source.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Menu System
Set up the following functions.
1 Enter menu mode
Press the [ ] button for at least 1 second.
“MENU” is displayed.
2 Select the menu item
Tune the [VOL] knob.
3 Set the menu item
Press the [ ] or [ ] button.
Usually, menu items are set by pressing the [ ]
or [ ] button. Some items, however, requires that
the [ENTER] button being pressed for at least 1 or
2 seconds, before the settings can be made. 1 sec.
or 2 sec. icon is displayed in the “Entry” column for
such an item.
4 Exit menu mode
Press the [ ] button.
Item Setting Entry Setting overview Condition Page
“Skip Search” “0.5%”*/ “1%”/
“5%”/ “10%”
Sets the ratio of skip performed with <Music Search for iPod>.
12
“Beep” “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/OFF.
——
“Clock Adjust” —
1 sec.
Sets the clock.
—5
“Date Adjust” —
1 sec.
Sets the date.
—5
“Date Mode” —
1 sec.
Sets the date display format.
—5
“ILM Dimmer” “Auto”*/ “Manual”/
“OFF”
Sets whether the key illumination is dimmed in conjunction with
the light switch of the vessel or it is dimmed constantly.
—**
“ILM Effect” “OFF”/ “ON”*
Sets whether the key illumination brightness is changed in
conjunction with the key operation.
——
“DISP Dimmer” “Auto”*/ “Manual”/
“OFF”
Sets whether the display illumination is dimmed in conjunction
with the light switch of the vessel or it is dimmed constantly.
—**
“Contrrast” “1” – “10”
Adjusting the display contrast.
——
“DISP N/P” “POSI 1”/ “2”
/ “NEGA 1”/ “2”
Switches the panel display between positive or negative.
—**
“AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier.
—**
“Supreme” “OFF”/ “ON”*
Turns ON/OFF the Supreme function.
**
“Seek Mode” “Auto1”*/ “Auto2”/
“Manual”
Selects the tuning mode of the radio.
**
“Seek Mode” “Channel”*/ “Preset”
Sets the seek mode of satellite radio.
19
“Auto Memory” — 2 sec.
Memorizes six stations with good reception automatically.
11
“CRSC” “OFF”/ “ON”*
Switches to Monaural to decrease noise when reception is poor.
—
“ESN=” —
Displays the Electronic Serial Number of satellite radio.
—
“Name Set” —
1 sec.
Sets the display when switched to AUX source.
10
“Scroll” “Auto”*/ “Manual”
Specifies whether the text is scrolled automatically.
——
“Favorite Delete” —
1 sec.
Deletes Favorite Preset Memory.
—17
“Built in AUX” “OFF”/ “ON”*
Sets whether to display AUX during source selection.
——
“Audio Preset” —
1 sec.
Registering the value setup by Audio Control.
—15
“Backup MEM DEL” —
1 sec. Initializes the settings of “MENU”, etc. —16
“SYS F/W VER” —
Display the firmware version and update the firmware.
——