Filter
Top Products
16
4
MHZ MODE
If the desired operating frequency is far away from the
current frequency, it is quicker to use the MHz Tuning
Mode.
To adjust the MHz digit:
1
While in VFO or Call Mode, press
[MENU]
.
• The MHz digit blinks.
2
Turn the
Tuning
control to select the desired MHz
value.
3
Press any key to set the selected frequency and return
to normal VFO Mode.
4
Continue adjusting the frequency as necessary, using
the
Tuning
control or Mic
[UP]
/
[DWN]
.
DIRECT FREQUENCY ENTRY
In addition to turning the
Tuning
control or pressing Mic
[UP]
/
[DWN]
, there is another way to select the frequency.
When the desired frequency is far away from the current
frequency, you can directly enter a frequency using the
Mic keypad (keypad models only).
1
Press
[VFO]
.
• You must be in VFO mode to make a direct frequency
entry.
2
Press the Mic PF key assigned the ENTER function
{page 59}.
3
Press the numeric keys (
[0]
to
[9]
) to enter your
desired frequency.
• Pressing Mic
Enter
fills all remaining digits (the digits
you did not enter) with 0 and completes the entry. For
example, to select 145.000 MHz, press
[1]
,
[4]
,
[5]
and
press Mic
Enter
to complete the entry.
• If you want to revise the MHz digits only, leaving the kHz
digits as they are, press Mic
[VFO]
in place of Mic
Enter
.