Filter
Top Products
53
10
ADJUSTING THE PAUSE DURATION
You can change the pause duration (a space digit) stored
in Memory Channels. The default setting is
500 milliseconds.
1
Press
[F]
,
[MENU]
and turn the
Tuning
control to
select Menu No. 31 (PA).
2
Press
[MENU]
and turn the
Tuning
control to select
100, 250, 500 (default), 750, 1000, 1500, or 2000 ms.
3
Press
[MENU]
to store the setting or any other key to
cancel.
4
Press any key other than
[MENU]
to exit Menu Mode.
DTMF LOCK
You sometimes may want to disable the keypad to avoid
accidental DTMF transmission. In this case, turn the
DTMF Lock function ON.
1
Press
[F]
,
[MENU]
and turn the
Tuning
control to
select Menu No. 32 (DT.L).
2
Press
[MENU]
and turn the
Tuning
control to select
“ON” or “OFF” (default).
3
Press
[MENU]
to store the setting or any other key to
cancel.
4
Press any key other than
[MENU]
to exit Menu Mode.
When this function is activated, you cannot send
DTMF tones using the Mic keypad. DTMF memory
transmission is also inhibited.