La Crosse Technology WS-6020U-IT Marine Instruments User Manual


 
12
the batteries back into the Temperature
station (slide the switch to the up if using the
included solar-rechargeable batteries), press
the RESET key on the Sensor and follow the
set up process again.
3. The distance between the Temperature
Station and the Sensor should not be more
than 200 feet (60.96m) to ensure sufficient
915 MHz transmission.
NOTE: When changing the batteries:
1. Be careful that they do not spring free
from the contacts.
2. Press any button 20 times with the
batteries removed.
3. Wait at least 10 minutes after removing
batteries before re-inserting them to
avoid start-up problems.
WARNING! "Do NOT recharge the included
solar rechargeable batteries in any device
other than the product they came
with. Recharging the rechargeable solar
batteries in battery chargers or other third
party devices will damage the batteries and
charging device."
POSITIONING THE TEMPERATURE
STATION:
Stand the Temperature Station on a table top,
counter or desk, or mount is on a wall.