Filter
Top Products
13
Ensure that the Temperature Station continuously
receives the 915MHz signal from the Sensor
before mounting it in the desired location. The
Temperature Station should be placed in a bright
environment for the solar cell to collect enough
light to recharge the included solar-rechargeable
batteries.
WALL MOUNTING
1. Install a mounting screw
(not included) into a wall—leaving
approximately 3/16 of an inch
(5mm) extended from the wall.
2. Place the Temperature
Station onto the screw, using the
hanging hole on the backside.
Gently pull the Temperature
Station down to lock the screw
into place.
NOTE: Always ensure that the
Temperature Station locks onto the screw before
releasing.
TABLE STAND: Attach the base stand to the
bottom/back on the Temperature Station. Place of
desk or table.
POSITIONING THE SOLAR TRANSMITTER
(SENSOR):
It is important to place the Sensor in a bright
environment for the solar panel to collect enough