LG Electronics 55WL30MS Marine Instruments User Manual


  Open as PDF
of 94
 
90
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
61. PC Power Control (Command: d t)
TocontrolthePCpowerifthePCandthemonitor
aresynchronized.
Transmission
[d][t][][SetID][][Data][Cr]
Data
00:Synchronized(Whenthemonitorisoff,thePCis
alsoturnedoff.)
01:Notsynchronized(ThemonitorisoffbutthePC
ison.)
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[t][][SetID][][OK][Data][x]
62. PC Power (Command: d s)
ControlthePCpower.
Transmission
[d][s][][SetID][][Data][Cr]
Data 00:PCisturnedoff.
01:PCisturnedon.
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[s][][SetID][][OK][Data][x]
63. Easy Brightness Control Mode (Command: s m)
SelectsON/OFFofEasyBrightnessControlMode.
Transmission
[s][m][][SetID][][Data][Cr]
Data 00:EasyBrightnessControlOFF
01:EasyBrightnessControlON
*Itdoesnotworkifthecurrenttimeisnotsetup.
**Itmaynotbesupported,dependingonthemodel.
Acknowledgement
[m][][SetID][][OK/NG][Data][x]
64. Easy Brightness Control Schedule (Command: s
s)
SetstheEasyBrightnessControlSchedule.
Transmission
[s][s][][SetID][][Data1][][Data2][][Data3][Cr]
Data1
1.F1-F6(DataReadingFunctions)
F1:Readsthedataofthe1stEasyBrightness
Control
F2:Readsthedataofthe2ndEasyBrightness
Control
F3:Readsthedataofthe3rdEasyBrightness
Control
F4:Readsthedataofthe4thEasyBrightness
Control
F5:Readsthedataofthe5thEasyBrightness
Control
F6:Readsthedataofthe6thEasyBrightness
Control
2.E1-E6(DeletesOneIndex),E0(DeleteAll
Indexes)
E0:DeletesallEasyBrightnessControls
E1:Deletesthe1stEasyBrightnessControl
E2:Deletesthe2ndEasyBrightnessControl
E3:Deletesthe3rdEasyBrightnessControl
E4:Deletesthe4thEasyBrightnessControl
E5:Deletesthe5thEasyBrightnessControl
E6:Deletesthe6thEasyBrightnessControl
3.00-17:00-23:00
Data200-3B:00-59minutes
Data300-64:backlight0-100
*ToreadordeletetheconfiguredEasyBrightness
Controllist,set[Data2][Data3]toFF.
(ex1:ss01f1ffff-Readsthe1stindexdatafromthe
EasyBrightnessControl.
ex2:ss01e1ffff-Deletesthe1stindexdatafrom
theEasyBrightnessControl.
ex3:ss01071E70-Addsascheduletothe
backlight70at07:30.)
Acknowledgement
[s][][SetID][][OK/NG][Data1][Data2][Data3][x]
**Itmaynotbesupported,dependingonthemodel.
 previous next