© 2006 Cisco Systems, Inc. All Rights Reserved.
Linksys/Cisco Proprietary – All Content Subject To Change – Not a Warranty
31
LVS Wizard Checklist
• The wizard is available for download from www.linksys.com .
– Unzip the files and run the .exe file from your PC.
– The PC should be installed in the same network as the LVS 9000 system.
• The following are the minimum required devices needed to be
connected to run the wizard:
– SPA9000 Unit.
– SPA9xx series phones (SPA942, SPA921, SPA901, etc).
– A network router and a switch with enough Ethernet ports for all the
devices to be in the network.
– An analog phone --- to be connected to SPA9000 Phone 1 port.
– A Window based PC to run the wizard.
• A Valid VoIP Service Provider Account and voicemail settings if
applicable